
A 162 cm freestanding water wall with a curtain of water flowing down a textured black panel into a stacked-stone base. Available in Black and Black & Beige. Warm LED strip lights run down both sides of the curtain and make the water shimmer at night. Made from sandstone cement fibre for outdoor use, and runs on 12 V with an SAA-approved adaptor, Australian plug and 10-metre cord.
The Cortina Water Curtain Wall Fountain is a bold, modern statement piece for entrances, courtyards, patios, pool areas, gardens and commercial outdoor spaces. Standing 162 cm tall and 87 cm wide, it brings the look and sound of a designer water wall without any building work.
Water rises from the base, spills over the top edge and falls in a smooth, even curtain down a black textured panel. The fine ripples in the panel break up the flow, so the water catches the light as it runs down and fills the space with a soft, steady sound. The panel is framed by side columns with a rough stacked-stone texture and sits in a matching brick-textured base that holds about 50 L of water.
After dark, warm white LED strip lights along both sides of the panel light the water curtain from edge to edge, giving it a glowing, shimmering finish that looks striking in any outdoor setting.
Choose from two finishes:
- Black: a black water curtain panel inside a deep-dark frame and base, for a sleek, contemporary look that suits modern homes, resorts and commercial landscapes
- Black & Beige: the same black water curtain panel inside a warm sand-beige stacked-stone frame and base. The LED light glows golden against the beige, giving a softer, natural-stone look that suits Mediterranean, resort and classic gardens
The Cortina is made from sandstone cement fibre, a strong, weather-resistant material made for outdoor use. It runs on a low-voltage 12 V pump and LED lights, which are safe and simple to use outdoors, with an SAA-approved adaptor, an Australian plug and a 10-metre cord, giving you plenty of reach to a power point. It's supplied in one piece, so there's no assembly, and is covered by a 12-month warranty. At around 81 kg, it's a solid, stable piece.
Key features
- Tall 87 x 33 x 162 cm freestanding water curtain wall
- Smooth curtain of water over a black textured panel
- Side columns and base with stacked-stone texture
- Warm white LED strip lights down both sides of the water curtain
- Low-voltage 12 V pump and LED lights included, with SAA-approved adaptor
- Australian plug with 10-metre cord
- Approx. 50 L water capacity
- Approx. 81 kg
- Made from durable sandstone cement fibre for outdoor use
- Supplied in 1 piece, no assembly needed
- Available in Black and Black & Beige
- 12 months warranty
- Pre-order now, available from 13 November 2026 (limited stock: 4 Black, 3 Black & Beige)
- Ships Australia-wide from our Riverstone, NSW warehouse
Specifications
| Specification | Details |
|---|---|
| Item no. | DLS007 |
| SKU – Black | 0717052727211 |
| SKU – Black & Beige | 0717052727228 |
| Overall dimensions | 87 cm W x 33 cm D x 162 cm H |
| Wall panel | 70 cm W x 17.5 cm D x 138.5 cm H |
| Base | 86 cm W x 32.5 cm D x 29 cm H |
| Material | Sandstone cement fibre |
| Colours | Black (black panel, deep-dark frame and base) / Black & Beige (black panel, sand-beige frame and base) |
| Weight | Approx. 81 kg |
| Water capacity | Approx. 50 L |
| Pump | Low-voltage 12 V electric pump included |
| Lighting | Low-voltage 12 V warm white LED strip lights |
| Power | 12 V with SAA-approved adaptor, Australian plug, 10 m cord |
| Use | Outdoor |
| Pieces | 1 (one piece, no assembly) |
| Availability | From 13 November 2026 |
| Warranty | 12 months |
Shipping
Shipped from our Riverstone, NSW warehouse.
| Delivery area | Cost |
|---|---|
| Local delivery (within 20 km of Riverstone) | $45 |
| 20 km to 100 km from Riverstone | $65 |
| NSW (more than 100 km from Riverstone) | $89 |
| ACT | $119 |
| VIC | $139 |
| SA | $149 |
| QLD | $168 |
| TAS | $199 |
| WA | $299 |
| NT | $429 |
Remote and regional areas may need a custom quote.
Setup
- Supplied in one piece, so there's no assembly needed.
- Place on a level, solid surface that can carry around 81 kg plus the weight of water.
- Position within 10 m of a weatherproof outdoor power point.
- Fill the base with water, connect the pump and lights, and switch on.
- Adjust the pump flow until the water curtain runs evenly across the panel.
Care notes
- Keep the water topped up so the pump never runs dry, especially in hot or windy weather.
- Clean the pump and the top water channel regularly and use a fountain-safe water treatment to reduce algae and mineral build-up.
- Wipe surfaces with a soft brush or cloth and mild soapy water. Avoid harsh chemicals and pressure washers.
- In very cold areas, drain the fountain and switch off the pump during frost.





























