A 101.6 cm freestanding water wall with three tall, stepped water channels, each lit warm gold at the top. Water ripples down a textured wave-pattern surface into a stone-grey base lined with LED lights. Made from cement fibre for indoor and outdoor use, with a low-voltage 12 V pump and lights.
The Wisma Water Wall Fountain brings clean, architectural lines and the calm sound of running water to entries, living rooms, courtyards, balconies and patios. At just 36.8 cm wide and 22 cm deep, it stands just over a metre tall while taking up very little floor space.
Its front is divided into three narrow channels framed by smooth, raised borders. The centre channel rises above the two outer ones, giving the fountain a stepped, modern skyline shape. Water spills from the top of each channel and runs down a finely textured wave-pattern surface, catching the light as it falls into the base and filling the space with a soft, steady sound.
Warm lights at the top of each channel make the water glow gold as it starts to fall, and a strip of LED lights along the base lights it again from below. After dark, the Wisma becomes a glowing feature piece, inside or out.
The Wisma is made from cement fibre, a strong, weather-resistant material that is lighter than solid concrete, in a natural stone-grey finish. It runs on a low-voltage 12 V pump and LED lights, which are safe and simple to use indoors and outdoors, and is covered by a 12-month warranty.
Key features
- Slim 36.8 x 22 x 101.6 cm freestanding water wall
- Three stepped water channels with a taller centre panel
- Water ripples down a textured wave-pattern surface
- Warm lights at the top of each channel and LED lights along the base
- Low-voltage 12 V electric pump and lights included
- Made from durable cement fibre in a natural stone-grey finish
- Self-contained, with no pond needed
- Suitable for indoor and outdoor use
- Approx. 12 kg
- 12 months warranty
- In stock and ships Australia-wide from our Riverstone, NSW warehouse
Specifications
| Specification | Details |
|---|---|
| SKU | 0717052725576 |
| Dimensions | 36.8 cm W x 22 cm D x 101.6 cm H |
| Material | Cement fibre |
| Colour | Natural stone grey |
| Pump | Low-voltage 12 V electric pump included |
| Lighting | Low-voltage 12 V warm white LED lights |
| Use | Indoor and outdoor |
| Weight | Approx. 12 kg |
| Warranty | 12 months |
Shipping
Shipped from our Riverstone, NSW warehouse. Shipping weight approx. 12 kg.
| Delivery area | Cost |
|---|---|
| NSW & ACT | $29 |
| VIC & QLD | $39 |
| SA & TAS | $45 |
| WA | $59 |
| NT | $95 |
| New Zealand (main centres) | $119 |
| New Zealand (rural & remote) | $136.85 |
Free pickup is available from our Riverstone, NSW warehouse. Rates shown are for this item on its own; the final cost is confirmed at checkout. Remote and regional areas may need a custom quote.
Setup
- Place on a level, solid surface that can carry around 12 kg plus the weight of water.
- Position near a power point. Outdoors, use a weatherproof outdoor power point.
- Fill the base with water, connect the pump and lights, and switch on.
- Adjust the pump flow until the water runs evenly down all three channels.
Care notes
- Keep the water topped up so the pump never runs dry, especially in hot or windy weather.
- Clean the pump regularly and use a fountain-safe water treatment to reduce algae and mineral build-up.
- Wipe surfaces with a soft brush or cloth and mild soapy water. Avoid harsh chemicals and pressure washers.
- In very cold areas, drain the fountain and switch off the pump during frost.
The name
Wisma (WIS-mah) is the Indonesian word for a building or residence. It suits a fountain with a tall, architectural shape and stepped skyline lines. It sits well alongside Negara in our cement fibre water wall range.













